Residential Mechanical Inspector (M1) Practice Exam
Residential Mechanical Inspector (M1) Practice Exam
About Residential Mechanical Inspector (M1) Practice Exam
The exam has been built for the Residential Mechanical Inspector who is accountable for performing inspections of the installation, maintenance, alteration of mechanical systems that are installed and utilized to provide control of environmental conditions and related process for one-and-two family dwellings not more than three stories. Moreover, the residential mechanical inspector is also responsible for verifying the installation of fuel gas distribution piping and equipment, fuel-gas-fired appliances and fuel gas-fired appliance wiring.
The inspector shall have the knowledge and understand minimum standards required to safeguard life or limb, health, property, and public welfare by regulating the design, construction, installation, quality of materials, location, operation, and maintenance or use of mechanical and fuel gas systems. The inspector shall also have the knowledge and understanding of “soft skills.” Soft skills can be defined as personal attributes that enhance a person’s ability to interact effectively with others."
Exam Details
- Exam Name: Residential Mechanical Inspector
- Exam ID: M1
- Exam Category: Mechanical, PMG, Residential Inspector
- Code Year: 2018
- Total Questions: 60
- Exam Duration: 2 hours
- Exam Format: Open Book
Course Outline
The Residential Mechanical Inspector (M1) Exam covers the following topics -
| General Administration | 10% |
|---|---|
Project Administration Verify that project information, including approved plans and specifications, is provided and is adequate. Verify that required permits are issued and valid. Verify that products not detailed in the code are approved by the building official and installed according to their listing. | 2% |
Public Information and Legal Provide general information on code provisions. | 3% |
Manufacturer's Installation Instructions Verify the manufacturer’s installation instructions and the listing of the equipment have been followed during the installation of the equipment. | 5% |
| Heating/Cooling/Water Heaters | 25% |
Heating Equipment Verify that the installations of mechanical equipment and appliances comply with code requirements, the manufacturer's instructions, and listing of the equipment and have proper access, clearances, supply air, return air, and connection to ducts and plenums. | 10% |
Water Heaters and Boilers Verify that the installations of water heaters and boilers comply with code requirements, the manufacturer's instructions, and listing of the equipment and have proper access and clearances. | 4% |
Cooling and Refrigeration Verify that the installation of cooling systems and cooling units complies with code requirements, the manufacturer's instructions, and listing of the equipment and have proper access and clearances, supply air, return air, and connection to ducts and plenums. | 5% |
Other Systems Verify that special systems utilizing fuel-burning equipment such as interior open-flame grills, pool and sauna heaters, hydronic heating systems, and decorative appliances comply with code requirements, the manufacturer’s instructions, and listing of the equipment and have proper access and clearances. | 3% |
Heat Pumps and Solar Thermal Energy Verify that hydronic heating, including ground source heat pump systems an solar thermal energy systems comply with code requirements, the manufacturer's instructions, and listing of the equipment and have proper access and clearances. | 3% |
| Exhaust and Ventilation Systems | 8% |
Exhausts, Fans, and Kitchen Range Hoods Verify that the installation of exhaust fans and range hoods complies with code requirements. Verify that proper mechanical ventilation is provided where required. | 3% |
Clothes Dryer Exhaust Verify that the installation of clothes dryer exhaust ducts complies with code requirements. | 5% |
| Duct Systems | 8% |
Duct Construction and Installation Verify that ducts are constructed of acceptable materials and that installation methods, including support and insulation, comply with code. | 3% |
Duct and Plenum Use and Application Verify the correct use and application of ducts and plenums with the mechanical system installed. Verify sizing of the supply and return air ducts. | 5% |
| Combustion Air | 16% |
Combustion Air Verify proper sources of air supply for fuel burning appliances and size and location of openings. Verify that materials and installation of combustion air ducts comply with code. | 16% |
| Chimneys and Vents | 19% |
Venting of Fuel-Burning Appliances Verify size, type, location, clearances, connections, and terminations of vents and venting systems. | 7% |
Chimney and Vent Connectors Verify size, type, location, and clearances of chimney and vent connectors for compliance with code. | 7% |
Factory-Built Chimneys and Fireplaces Verify clearances, bracing, listing, and labeling of the installation of factory-built chimneys and connectors. | 3% |
Masonry Chimneys and Fireplaces Verify proper construction of fireplace and chimney components. | 2% |
| Fuel Supply Systems | 15% |
Fuel Supply Installation and Sizing Verify that gas piping systems are installed with proper materials and supports and are sized properly. Verify that fuel gas piping is tested for tightness. | 8% |
Fuel System Connections Verify that fittings, valves, connections, and transition of materials are in compliance with code. | 5% |
Oil Piping and Storage Verify that the oil piping and storage are installed with proper materials and supports and are sized properly. Verify that fuel supply system is properly sized. | 2% |
- Full-Length Mock Test with unique questions in each test set
- Practice objective questions with section-wise scores
- In-depth and exhaustive explanation for every question
- Reliable exam reports evaluating strengths and weaknesses
- Latest Questions with an updated version
- Tips & Tricks to crack the test
- Unlimited access
What are our Practice Exams?
- Practice exams have been designed by professionals and domain experts that simulate real-time exam scenario.
- Practice exam questions have been created on the basis of content outlined in the official documentation.
- Each set in the practice exam contains unique questions built with the intent to provide real-time experience to the candidates as well as gain more confidence during exam preparation.
- Practice exams help to self-evaluate against the exam content and work towards building strength to clear the exam.
- You can also create your own practice exam based on your choice and preference
