CCT Routing and Switching 100-490 RSTECH
The CCT Routing and Switching 100-490 RSTECH certification is the best foundation for supporting other Cisco devices and systems. This certification demonstrates your expertise for onsite support and maintenance of Cisco routers, switches, and other operating environments. CCT Routing and Switching Technicians are proficient in Cisco routing and switch models, accessories, cabling, and interfaces. Taking this exam will help you gain an understanding of the Cisco IOS software operating modes and in identifying the commonly found software. You will attain command of the Cisco Command Line Interface (CLI) for connecting and servicing products.
Exam Result
Right after completing your exam, you will receive your score report which will be imprinted with your digital photo, captured during admission. The result will also contain a section-wise score breakout along with the passing score. You will have the option to share this photo-imprinted score reports with employers. You can also decide to provide them with preferred online access, for verification purposes, at the Authenticate score report. You can confirm the online photo and exam score results on the Pearson VUE candidate tracking webpage. This is an official method.
Exam Retake Policy
If you fail in the exam of Associate, Professional, Specialist, or CCDE level, then you must wait for a period of five (5) calendar days, before becoming eligible for taking a re-attempt. Once you have passed the exam, you must wait for a minimum of 180 days before becoming eligible to take the same exam, with an identical exam number. Candidates failing in an Online / Un-Proctored Cisco (700-xxx series) exam will have to wait for forty-eight hours (48hrs) before retesting the same exam.
Re-certification
Your CCT Routing and Switching 100-490 RSTECH certification will be valid only for a period of three years. After three years you will have to re-certify yourself to gain desired benefits. You can re-certify yourself by completing education activities, by taking exams, or by a combination of both. These are the ways available for re-certifcation.
- Take an exam
- Attend Cisco Live training sessions
- Author content
- Complete online training courses
- Complete instructor-led training
- Three-year re-certification requirement
Exam Details
For More Details See – CCT Routing and Switching 100-490 RSTECH FAQ
Course Outline – CCT Routing and Switching 100-490 RSTECH
General Networking Knowledge [25%]
1.1 Using the OSI and TCP/IP models and associated protocols (Cisco Reference: TCP/IP Overview)
1.2 Describing the basic functionality and differences of hardware [LAN switch, router, and wireless access points] (Cisco Reference: Wireless Access Points, Switch vs a Router, Switches)
1.3 Differentiating between Layer 2 technologies [Ethernet, Fast Ethernet, Gigabit Ethernet, Serial, and Optical] (Cisco Reference: Configuring Layer 2 Ethernet Interfaces, Configuring the Serial Interface)
1.4 Describing LAN cabling, functions of CSU/DSU, and Telco termination point (Cisco Reference: DSU/CSU WAN Interface Cards)
1.7 Describing an IPv4 and IPv6 address and subnet, functions of FTP, TFTP, PING, Telnet, and SSH (Cisco Reference: Connecting IPv6 and IPv4 Networks, Configure TFTP Servers)
Cisco Equipment and Related Hardware [20%]
2.1 Identifying all Cisco equipments (Cisco Reference: Products, Solutions, and Services)
2.2 Identifying Cisco products by logo marking and model number
2.3 Identifying Cisco Transceiver Modules (Cisco Reference: Cisco Transceiver Modules)
2.4 Identifying and locating the serial number of Cisco products (Cisco Reference: Product Identification Standard)
2.5 Identifying and describing commonly used components (Cisco Reference: Interface and Hardware Component Configuration Guide)
2.6 Describing hardware memory common terms and their use in Cisco routers and switches (Cisco Reference: Maintaining System Memory)
2.7 Identifying the cabling on Cisco equipment (Cisco Reference: Cabling Guide for Console and AUX Ports)
2.8 Identifying tools for hardware installation and replacement
2.9 Identifying the different loop-back plugs (RJ45 Ethernet, T1, 56K) (Cisco Reference: Loopback Tests for T1/56K Lines)
Cisco IOS Software Operation [29%]
3.1 Describing the key role of Cisco IOS, IOS-XE, IOS-XR and NX-OS software (Cisco Reference: Cisco IOS Software, Cisco IOS XE Configuration, IOS XR7 Data Sheet, Cisco NX-OS Software)
3.2 Navigating between different operating mode
3.3 Determining the current mode of a device
3.4 Copying and pasting a configuration file from/to a router or switch (Cisco Reference: Back up and Restore Configuration Files)
3.5 Using and interpreting the basic Cisco IOS Software commands (Cisco Reference: Basic Router IOS Commands)
3.6 Describing the location and process to change the configuration register parameter (Cisco Reference: Use of the Configuration Register on All Cisco Routers)
3.7 Identifying a configuration file from a Cisco device (Cisco Reference: Managing Configuration Files Configuration Guide)
3.8 Describing the licensing process on different platforms
3.9 Describing Bundle Mode/Install Mode IOS-XE
Service – Related Knowledge [26%]
4.1 Locating and using text editors like Notepad, and Windows command prompt (Cisco Reference:
4.3 Locating, configuring, and using Terminal Emulation ( Tera Term, Putty) (Cisco Reference: configure external terminal applications
4.4 Configuring networks settings for Ethernet port on a laptop and establishing a connection with Ethernet ports on Cisco equipment (Cisco Reference: Connecting the Router, Set Up a Router)
4.5 Making a physical connection from laptop to Cisco console port (Cisco Reference: Connecting the Router)
4.6 Connecting, configuring and verifying operation status of a device interface
4.7 Configuring and using TFTP and FTP servers (TFTP d32/64, FIlezilla) (Cisco Reference: Server FTP, TFTP Server Selection and Use)
4.8 Performing software up-gradation or down-gradation using TFTP, FTP, xmodem, tftpdnld, or USB Storage (Cisco Reference: Xmodem Console Download Procedure, Access Routers Software Upgrade Procedures)
4.9 Managing configurations via the TCP/IP network (Cisco Reference: Configure Transmission Control Protocol (TCP), Configuring TCP)
4.10 Performing password recovery on a Cisco device (Cisco Reference: Password Recovery Procedure)
4.11 Identifying and correcting common network problems at Layers 1 and 2
Preparation Guide – CCT Routing and Switching 100-490 RSTECH Exam
E-Learning
Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0
Cisco Learning Network Store offers this E-Learning source for the candidates seeking to take the CCT Routing and Switching 100-490 RSTECH Exam. The course is primarily designed for Cisco’s Third-Party Maintainer Field Engineers. It aims to train you with the concepts and tactics of the CCT Routing and Switching field. After completion of the course, you will gain expertise in the following –
- Cisco software configuration and tools
- Network fundamentals
- Performing remedial services (hardware break/fix) on Cisco products
- Configuring remote servers
- Troubleshooting basic Layer 1 and basic Layer 2
- Recognizing connection endpoints
- Managing Cisco devices and systems
Cisco Virtual Internet Routing Lab
Cisco Learning Network Store also provides several practice platforms for the ones taking its certification program. The Cisco Virtual Internet Routing Lab Personal Edition (VIRL PE) is one of these practice platforms. It provides you with an easy to use, and an extensible network modeling, and simulation environment.
Benefits
- Building highly-accurate models of existing or planned networks
- Designing, configuring, and operating networks using authentic versions of Cisco’s network operating systems
- Building common platforms [IOSv, IOSv Layer-2, IOS-XRv, NX-OSv, CSR1000v and ASAv]
- Integrating 3rd-party virtual machines, appliances, VNFs, and servers
- Connecting real and virtual networks to form high-fidelity development and test environments
Cisco Modeling Labs
Another practice platform offered by Cisco Learning Network Store is the Cisco Modeling Labs. This platform is primarily for modeling both Cisco and non-Cisco networks. It supports both large and small networks, owing to its architecture built. It also reduces lab costs and enhances your network management team’s productivity.
Benefits
- Designing and simulating network changes
- Pretesting network updates prior to physical deployment
- Testbed for application and device network interfacings
- Simulating production networks and troubleshooting
- Practicing internal operator with a virtual network
- CI/CD Automation
Join the Community/ Online Forum
A healthy discussion is always beneficial, no matter where it is done. The same goes for online discussion forums. This is a nice way for the students to discuss their issues and get insights into how their competitors are going for the exams. One thing which is an advantage for anything that comes online is the scope of people joining it. An offline discussion is restricted to a small number of people, whereas online platforms can reach a wider range.
The prospects of getting resolutions to an issue increase steeply when a greater number of people are involved. Also, multiple viewpoints make the stuff more dynamic. These discussions make the studies more comprehensive. Introverts get a chance to express themselves, who might otherwise prefer staying out of discussions. Forums work really well to build a community that is essential for understanding others.
Self-evaluation Time – Practice Exam
Cisco offers a practice test for the candidates taking their certification exam to give a better understanding of the exam objectives. Regardless of how you prepare for the 100-490 RSTECH Exam, a practice run or two can help you in more ways than you might expect. Taking a practice test is a great way to diversify your study strategy and ensure the best possible results for the real thing. Analyzing your answers will help you identify the areas where you need to give special attention to, and will also let you know your alignment with the exam objectives.