The 100-490 RSTECH exam, also called the CCT Routing and Switching certification exam, was created by Cisco to evaluate the abilities and understanding of new technicians who are learning about routing and switching. The exam includes various subjects like network basics, LAN switching methods, routing techniques, infrastructure services, and maintaining the infrastructure. It aims to evaluate whether candidates can set up, arrange, and resolve issues with Cisco routers and switches in medium-sized business networks.
CCT Routing and Switching (100-490 RSTECH) Certification: Exam glossary
Here are some key terms and concepts related to the CCT Routing and Switching (100-490 RSTECH) Certification Exam:
- Router: A network device that sends data between different computer networks.
- Switch: A device in a computer network that links devices together and uses packet switching to send data where it needs to go.
- Ethernet: A family of wired networking technologies commonly used for local area networks (LANs).
- TCP/IP: A set of protocols used for communicating on the internet and other networks.
- Routing: The process of forwarding data packets between computer networks.
- Switching: The process of forwarding data packets between devices on a computer network.
- VLAN: A virtual local area network that allows a group of devices to communicate as if they are on the same physical network, even if they are located on different switches.
- OSPF: A routing protocol used for internet protocol (IP) networks.
- STP: Spanning Tree Protocol, a networking protocol used to prevent loops in a network topology.
- IPv4: Internet Protocol version 4, the fourth version of the internet protocol.
- IPv6: Internet Protocol version 6, the most recent version of the internet protocol.
- NAT: Network Address Translation, a method of remapping one IP address space into another by modifying network address information in the IP header of packets while they are in transit across a traffic routing device.
These are just a few of the many terms and concepts you will encounter in the CCT Routing and Switching (100-490 RSTECH) Certification Exam. It’s important to familiarize yourself with these and other key concepts to have a solid understanding of networking and routing and switching technologies.
CCT Routing and Switching (100-490 RSTECH) Certification: Exam Guide
Here are some official resources that can help you prepare for the CCT Routing and Switching (100-490 RSTECH) certification exam:
- Cisco Certification Exam Tutorial: This tutorial gives an overview of the exam format and the types of questions you can expect to see. It also includes tips for preparing for the exam. You can access the tutorial here: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/rstech.html#~tutorial
- Exam Blueprint: This document outlines the topics and subtopics that are covered on the exam. It provides a detailed breakdown of the exam content and can help you focus your study efforts. You can access the exam blueprint here: https://learningnetwork.cisco.com/s/cct-routing-and-switching-exam-topics
- Study Groups: The Cisco Learning Network offers study groups where you can connect with other exam candidates to ask questions, share study tips, and get support. You can access the study groups here: https://learningnetwork.cisco.com/community/certifications/cct_routing_and_switching
- Official Study Material: Cisco offers official study materials that can help you prepare for the exam, including Cisco Press books, e-learning courses, and practice exams. You can access the official study materials here: https://learningnetworkstore.cisco.com/cisco-certified-technician-routing-and-switching
- Exam Registration: You can register for the exam on the Pearson VUE website. You will need to create an account, select the exam, and schedule a testing appointment. You can access the exam registration page here: https://home.pearsonvue.com/cisco
How to pass CCT Routing and Switching (100-490 RSTECH) Certification Exam?
Here are some tips that can help you prepare for and pass the CCT Routing and Switching (100-490 RSTECH) Certification Exam:
- Understand the exam objectives: The initial step in getting ready for the exam involves grasping the exam’s objectives. These objectives outline the subjects and ideas that will be addressed in the exam. Be certain to go over the exam objectives and delve deeply into the subjects.
- Study the Cisco learning materials: Cisco offers a range of learning materials that can help you prepare for the exam, including instructor-led courses, e-learning courses, and study guides. These materials cover the topics and concepts in detail and can help you prepare effectively for the exam.
- Take practice exams: Practice tests can assist you in evaluating how prepared you are for the exam and pinpointing areas that need improvement. Cisco provides various practice exams that mimic the real exam conditions.
- Hands-on experience: Hands-on experience with Cisco networking technologies is important to succeed in this exam. Try to get hands-on experience with Cisco routers and switches and practice configuring and troubleshooting them.
- Review exam dumps and study groups: While exam dumps and study groups can be helpful in supplementing your exam preparation, it’s important to use them responsibly. You can utilize these resources to check what you know and find where you should enhance your understanding, but don’t solely depend on them for your exam preparations.
- Manage your time during the exam: The CCT Routing and Switching (100-490 RSTECH) Certification Exam has a time limit of 90 minutes, so it’s important to manage your time effectively. Make sure you read the exam questions carefully, and allocate your time appropriately to each question.
- Stay calm and focused during the exam: The exam can be stressful, but it’s important to stay calm and focused during the exam. Take deep breaths, read each question carefully, and don’t rush through the exam.
By following these tips, you can increase your chances of passing the CCT Routing and Switching (100-490 RSTECH) Certification Exam.
Course Outline: 100-490 RSTECH
The candidate is not said to be fully prepared until they learn and understand the whole course outline for any exam. The CCT Routing and Switching (100-490 RSTECH) exam measure a candidate’s knowledge and skills associated with the following objectives. A candidate should have hands-on experience in CCT Routing and Switching (100-490 RSTECH) and demonstrate the knowledge and expertise in each of the areas below.
- General Networking Knowledge (25%)
- Cisco Equipment and Related Hardware (20%)
- Cisco IOS S0ftware Operations (29%)
- Service-related Knowledge (26%)
Exam Basic Details
Let us go through the basic details of the CCT Routing and Switching (100-490 RSTECH) exam. The exam includes 55-65 questions. The questions will appear in the form of a multiple-choice format. You can’t use any physical or online materials during the exam. The exam is in English, and the Cisco CCT Routing and Switching (100-490 RSTECH) certification is valid for three years.
Step-to-step Study Guide
Let us begin the discussion for ideal preparation for the CCT Routing and Switching (100-490 RSTECH) exam, the following details a some of the critical steps that you should study for producing an ideal plan for your CCT Routing and Switching (100-490 RSTECH) preparation.
Review the Exam Objectives
The initial step is to understand the exam goals. Before you begin preparing for the certification test, ensure you have the latest exam information. So, your primary task should involve visiting Cisco’s official website and checking if you have the same information as the website. If not, make sure you get updated with all the new exam details available. Pay attention to the objectives because they are crucial, and make sure to follow this step diligently. Let us quickly look at the objectives:
- First of all, General Networking Knowledge (25%)
- Then, Cisco Equipment and Related Hardware (20%)
- Also, Cisco IOS S0ftware Operations (29%)
- Further, Service-related Knowledge (26%)
Cisco E-Learning
Supporting Cisco Routing and Switching Network Devices (RSTECH) v3.0
The candidate should be happy to know that Cisco Learning Network Store grants E-Learning sources for those who are seeking to get the CCT Routing and Switching 100-490 RSTECH Exam. This beneficial course is essentially designed for Cisco’s Third-Party Maintainer Field Engineers. Further, it proposes to guide you with the ideas and tactics of the CCT Routing and Switching course. After completion of the course, you will gain expertise in the following –
- Firstly, cisco software configuration and tools
- Secondly, network fundamentals
- Then, performing remedial services (hardware break/fix) on Cisco products
- Also, configuring remote servers
- Further, troubleshooting basic Layer 1 and basic Layer 2
- In addition, recognizing connection endpoints
- Moreover, managing Cisco devices and systems
Cisco Virtual Internet Routing Lab
Do not forget the Cisco Learning Network Store which gives various practice platforms for the ones practicing its certification program. The Cisco Virtual Internet Routing Lab Personal Edition (VIRL PE) is one of these practice platforms. It provides you with an easy to use, and an extensible network modeling, and simulation environment. Let us discuss some perks of the same.
Perks:
- Building highly-accurate models of existing or planned networks
- Also, creating, configuring, and operating networks using authentic versions of Cisco’s network operating systems
- Further, building common platforms [IOSv, IOSv Layer-2, IOS-XRv, NX-OSv, CSR1000v, and ASAv]
- In addition, integrating 3rd-party virtual machines, appliances, VNFs, and servers
- Moreover, connecting real and virtual networks to form high-fidelity development and test environments
Cisco Modeling Labs
Another ste[ in the study guide is the practice platform that is offered by the Cisco Learning Network Store is the Cisco Modeling Labs. This is originally for modeling both Cisco and non-Cisco networks. It holds both large and small networks, prior to its architecture built. Also, it also decreases lab costs and improves the network management team’s productivity.
Advantages:
- Designing and simulating network changes
- Then, pretesting network updates prior to physical deployment
- Also, a testbed for application and device network interfacings
- Simulating production networks and troubleshooting
- Further, practicing internal operator with a virtual network
- CI/CD Automation
Practice Test
The most crucial step is to take practice tests. Practice tests are essential to help candidates gauge their preparation. Nowadays, there are many practice tests available on the internet, and candidates can choose the ones they prefer. Additionally, Cisco recommends practice tests for certification exam candidates to gain a better understanding of the exam objectives. Taking practice tests is an effective way to diversify your study approach and improve your chances of success in the real exam.
In addition, we at Testprep training also provides free practice test for making your preparation journey easier. Give them a shot!
Experts Corner
To take advantage of advanced technology and the opportunities it offers, today’s networking professionals would like a wider variety of skills and a deeper focus in strategic technology sectors. Further, the CCT Routing and Switching Enterprise certification program offers you exactly that breadth and depth.
Tips to Remember
- Gather all the related information about the exam.
- Attempt all the essential steps of the above-mentioned study guide.
- Don’t forget to try the practice test.
- Have faith in the hard work you’re doing.
Testprep training wishes you all the very best for your exam!
