If you are a Networking Professional, then you would understand the importance of CCNP Enterprise (300-410 ENARSI) exam in your career. With almost, all top IT companies requiring CCNP Enterprise Professionals, the need for certified and trained professionals is also on a rise. Since you are on a lookout for a study guide, we at Testprep Training aim to facilitate your preparation and boost your learning curve with expert learning resources. The study guide is designed to give you all the resources you need to get ready for the exam. Following the steps in the guide will make your preparation easier. But before we get into the details, let’s take a look at the exam information.
About CCNP Enterprise (300-410 ENARSI)
CCNP Enterprise (300-410 ENARSI) exam tests your understanding of advanced routing technologies and services, including troubleshooting. It also checks if you’re knowledgeable in Layer 3, VPN services, infrastructure security, infrastructure services, and infrastructure automation.
Who should take the exam?
The course is specially designed for –
- Enterprise network engineers
- System engineers
- System administrators
- Network administrators
Exam Prerequisites
There is no official prerequisite that is required to give the Cisco CCNP Enterprise (300-410 ENARSI) examination. However, it is recommended to have the knowledge and experience in the following areas to ease your learning –
- Firstly, you should have a general understanding of network fundamentals
- Secondly, it is recommended to have basic knowledge of how to implement LANs
- Thirdly, you must have a general understanding of how to manage network devices
- Also, a basic understanding of how to secure network devices
- Further, you should have a basic knowledge of network automation
Study Guide for CCNP Enterprise (300-410 ENARSI)
Getting through the exam can be straightforward if you select the right materials. Make sure they are accurate and trustworthy. The resources you choose will decide how well you prepare and pass the exam. So, be cautious when picking your study materials. There are plenty of options available, and this study guide points them out to help you excel in your exam. Let’s begin with your preparation!
Refer the CCNP Enterprise (300-410 ENARSI) Exam Guide
For any examination, it is important to know the course outline and guide. Cisco also provides the complete course guide on its Official Website. The official website is the most reliable source for information about the CCNP Enterprise (300-410 ENARSI) exam. Once you’ve checked out the basic exam info, it’s time to explore the exam guide. Take a close look at the exam topics and shape your study plan around them. This exam covers the following areas:
Domain 1 – Layer 3 Technologies (35 %)
This domain covers troubleshoot administrative distance. Then, troubleshoot route map for any routing protocol (attributes, tagging, filtering). Diagnose loop prevention mechanisms. Troubleshoot redistribution between any routing protocols or routing sources. Also, Diagnose manual and auto-summarization with any routing protocol. Configure and verify policy-based routing. Further, Configure and verify VRF-Lite. Describe Bidirectional Forwarding Detection. Debug EIGRP (classic and named mode). Moreover, Troubleshoot OSPF (v2/v3) and Troubleshoot BGP (Internal and External). Neighbor relationship and authentication and Path preference. Additionally, Route reflector an Policies (inbound/outbound filtering, path manipulation).
Domain 2 – VPN Technologies (20%)
This domain focuses on the topics to describe MPLS operations (LSR, LDP, label switching, LSP). Then, Describe MPLS Layer 3 VPN. Further, configure and verify DMVPN (single hub). Moreover, RE/mGRE, NHRP, IPsec, Dynamic neighbour and Spoke-to-spoke.
Domain 3 – Infrastructure Security (20%)
This domain includes the Troubleshoot device security using IOS AAA and Diagnose router security features IPv4 access control lists. Then, IPv6 traffic filter and Unicast reverse path forwarding (uRPF). Further, Troubleshoot control plane policing (CoPP) (Telnet, SSH, HTTP(S), SNMP, EIGRP, OSPF, BGP). Also, Describe IPv6 First Hop security features (RA guard, DHCP guard, binding table, ND inspection/snooping, source guard).
Domain 4 – Infrastructure Service (25%)
Lastly, this domain is much focused on the topics to Troubleshoot device management. Then, Console and VTY, Telnet, HTTP, HTTPS, SSH, SCP and (T)FTP. Further, Troubleshoot SNMP (v2c, v3) and Debug network problems using logging (local, Syslog, debugs, conditional debugs, timestamps). Also, Troubleshoot IPv4 and IPv6 DHCP and Diagnose network performance issues using IP SLA. Finally, Troubleshoot NetFlow (v5, v9, flexible NetFlow) and troubleshoot network problems using Cisco DNA Center assurance.
Choose Official Cisco Training
Cisco provides official training for the CCNP Enterprise (300-410 ENARSI) exam. The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) v1.0 provides you with the skills to set up, adjust, run, and fix problems in a business network. This can help you gain more expertise and advance to a senior-level job in your career. In this training program, you will cover the following topics:
- Firstly, Implement route redistribution using filtering mechanisms
- Secondly, Troubleshoot redistribution
- Thirdly, Implement path control using Policy-Based Routing (PBR) and IP service level agreement (SLA)
- Also, Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
- Further, Optimize MP-BGP in IPv4 and IPv6 environments
- Then, Troubleshoot MP-BGP for IPv4 and IPv6
- Subsequently, Additionally, Describe the features of Multiprotocol Label Switching (MPLS)
- Furthermore, Describe the major architectural components of an MPLS VPN
- Not to Mention, Identify the routing and packet forwarding functionalities for MPLS VPNs
- Additionally, Explain how packets are forwarded in an MPLS VPN environment
- Moreover, Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
- Then, Implement Dynamic Host Configuration Protocol (DHCP)
- And, Describe the tools available to secure the IPV6 first hop
- Also, Troubleshoot Cisco router security features
- Lastly, Troubleshoot infrastructure security and services
Join Study groups
Being part of study groups is a smart move when you’re preparing for your certification exam. These groups keep you informed about any recent changes or updates related to the exam. They have people at different levels, from beginners to experts, so you can freely ask questions or chat about the exam. Plus, you can start discussions about any exam-related issues or questions, and you’ll get the best answers.
Self Evaluate with Practice Tests
It’s crucial to practice what you’ve learned so you can get better at answering questions and save time during the actual exam. A good way to start practicing is after finishing a whole topic, as it serves as a review. Self-evaluation helps you understand your skills and identify areas where you need improvement. So, it’s a good idea to practice as much as possible. Let’s Start Practising Now!
